Lexmark MX910 Series - Page 64

Paper size Dimensions Standard
500‑sheet
tray (Tray
1)
Standard
500‑sheet
tray (Tray
2)
2 x 500‑
sheet
tray
2500‑sheet
tray
3000‑sheet
tray
Multipurpose
feeder
3
Two‑sided
printing
Letter 216 x 279 mm
(8.5 x 11 in.)
2 2
Legal 216 x 356 mm
(8.5 x 14 in.)
XX
Executive 184 x 267 mm
(7.3 x 10.5 in.)
XX
JIS B4 257 x 364 mm
(10.12 x 14.33 in.)
XX
SRA3 320 x 450 mm
(12.6 x 17.7 in.)
X
1
XX X
1
A3 297 x 420 mm
(11.69 x 16.54 in.)
XX
12 x 18 305 x 457 mm
(12 x 18 in.)
X
1
XX X
1
11 x 17 279.4 x 431.8 mm
(11 x 17 in.)
XX
Oficio 216 x 340 mm
(8.5 x 13.4 in.)
XX
Folio 216 x 330 mm
(8.5 x 13 in.)
XX
Statement 140 x 216 mm
(5.5 x 8.5 in.)
1 1 1
XX
Universal 89.9 x 139.7 mm
(3.54 x 5.5 in.) to
1219.2 x 1219.2
mm (48.0 x 48.0 in.)
XX
4
7 3/4
Envelope
98 x 191 mm
(3.9 x 7.5 in.)
XXXX X X
9 Envelope 98 x 225 mm
(3.9 x 8.9 in.)
XXXX X
X
10 Envelope 105 x 241 mm
(4.1 x 9.5 in.)
XXXX X
X
1
Paper is supported only in short‑edge orientation.
2
Paper is supported only in long‑edge orientation.
3
The paper source supports paper size without size sensing.
4
Universal is supported in two‑sided printing only if the width is from 139.7 mm (5.5 in.) to 320 mm (12.6 in.), and the
length is from 148 mm (5.83 in.) to 458 mm (18 in.).
Note: Banner is supported in the multipurpose feeder only if the width is up to 296.9 mm (11.69 in.) and the length is up
to 1219.2 mm (48 in.). Make sure the paper size setting is set to Universal.
Paper and specialty media guide 64