Lexmark MX910 Series - Page 65

Paper size Dimensions Standard
500‑sheet
tray (Tray
1)
Standard
500‑sheet
tray (Tray
2)
2 x 500‑
sheet
tray
2500‑sheet
tray
3000‑sheet
tray
Multipurpose
feeder
3
Two‑sided
printing
DL Envelope 110 x 220 mm
(4.3 x 8.7 in.)
XXXX X
X
C5 Envelope 162 x 229 mm
(6.4 x 9 in.)
XXXX X
X
B5 Envelope 176 x 250 mm
(6.9 x 9.8 in.)
XXXX X
X
Other
Envelope
98 x 162 mm
(3.9 x 6.3 in.) to
176 x 250 mm
(6.9 x 9.8 in.)
XXXX X
X
1
Paper is supported only in short‑edge orientation.
2
Paper is supported only in long‑edge orientation.
3
The paper source supports paper size without size sensing.
4
Universal is supported in two‑sided printing only if the width is from 139.7 mm (5.5 in.) to 320 mm (12.6 in.), and the
length is from 148 mm (5.83 in.) to 458 mm (18 in.).
Note: Banner is supported in the multipurpose feeder only if the width is up to 296.9 mm (11.69 in.) and the length is up
to 1219.2 mm (48 in.). Make sure the paper size setting is set to Universal.
Paper sizes supported by the ADF and scanner glass
Paper size Dimensions ADF Scanner glass
Business card X
1,2
3 x 5 76.2 x 127 mm (3 x 5 in.) X
1,2
4 x 6 101.6 x 152.4 mm (4 x 6 in.)
2 1,2
A4 210 x 297 mm (8.3 x 11.7 in.)
A5 148 x 210 mm (5.8 x 8.3 in.)
2
A6 105 x 148 mm (4.1 x 5.8 in.)
1,2 1,2
JIS B5 182 x 257 mm (7.2 x 10.1 in.)
Letter 216 x 279 mm (8.5 x 11 in.)
Legal 216 x 356 mm (8.5 x 14 in.)
Executive 184 x 267 mm (7.3 x 10.5 in.)
JIS B4 257 x 364 mm (10.12 x 14.33 in.)
SRA3 320 x 450 mm (12.6 x 17.7 in.) XX
1
Paper is supported only in short‑edge orientation.
2
The paper source supports paper size without size sensing.
Paper and specialty media guide 65