9
Open door C, and then remove the jammed paper.
Note: Make sure that all paper fragments are removed.
10
Close door C, and then close door A.
Paper jam in the staple, hole punch
finisher
1
Open door A.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
2
Open door A1, and then remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3
Close door A1, and then close door A.
4
Lift the paper transport cover F, and then remove the jammed
paper.
Note: Make sure that all paper fragments are removed.
25
To Next Page
Loading...
