4
Shake the toner cartridge to redistribute the toner.
5
Insert the new toner cartridge.
6
Remove the printhead wiper, and then clean the printhead
lens.
7
Put the printhead wiper back into place.
8
Close the door.
Loading the 520-sheet tray
CAUTION—TIPPING HAZARD: To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Pull out the tray.
Note: To avoid jams, do not pull out trays while the printer is
busy.
2
Adjust the guides to match the size of the paper that you are
loading.
Note: Use the indicators on the bottom of the tray to position
the guides.
8
To Next Page
Loading...
