3
Flex, fan, and align the paper edges before loading.
4
Load the paper stack with the printable side faceup.
When loading letterhead or prepunched paper, do either of the
following:
For one‑sided, long‑edge printing
•
Load letterhead faceup with the header toward the back of
the tray.
•
Load prepunched paper faceup with the holes against the
left side of the tray.
For one‑sided, short‑edge printing
•
Load letterhead faceup with the header toward the left side
of the tray.
•
Load prepunched paper faceup with the holes against the
front of the tray.
For two‑sided, long‑edge printing
•
Load letterhead facedown with the header toward the back
of the tray.
•
Load prepunched paper facedown with the holes against
the right side of the tray.
9
To Next Page
Loading...
