103
Resetting
Maint Cnt Value
What this message means:
The printer is resetting the counter that tracks wear on the fuser.
What you can do:
Wait for the message to clear.
Restoring Factory
Defaults
What this message means:
The printer is restoring the factory default printer settings. When factory default settings are
restored:
• All downloaded resources (fonts, macros, symbol sets) in the printer memory are deleted.
• All menu settings return to the factory default setting except:
– The Display Language setting in the Setup Menu.
– All settings in the Parallel Menu, Serial Menu, Network Menu, Infrared Menu, LocalTalk
Menu, and USB Menu.
What you can do:
Wait for the message to clear.
Serial <x>
What this message means:
A serial interface is the active communication link.
Std Bin Full
What this message means:
The standard output bin is full.
What you can do:
Remove the stack of paper in the bin to clear the message.
To Next Page
Loading...
