36
Loading paper and transparencies
a Load paper with the left edge of the stack against the stack height limiter and with the
recommended print side face up.
b Continue with step 7.
Loading envelopes
a Load envelopes flap side down with the stamp area and flap on the left side. The end of
the envelope with the stamp area enters the multipurpose feeder first.
WARNING: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-
stick adhesives. These envelopes may severely damage the printer.
b Continue with step 7.
Note: If envelopes jam while printing, try reducing the number of envelopes in the
multipurpose feeder.
To Next Page
Loading...
