Lexmark T522 - Chapter 47: Disabling Operator Panel Menus

181
46
Disabling operator panel menus
To disable the operator panel menus so that changes cannot be made to the printer default settings:
1 Turn the printer off.
Note: Disabling the operator panel menus does not prevent access to the Job Menu or
to Print and Hold functionality.
2 Press and hold Select and Return and turn the printer on.
3 Release the buttons when you see Performing Self Test.
Config Menu appears on the first line of the display.
4 Press Menu until you see Panel Menus, and then press Select.
Disable appears on the second line of the display.
5 Press Select.
Locking Menus appears briefly.
6 Press Menu until you see Exit Config Menus, and then press Select.
The menus are disabled. If you press Menu, the message Menus Disabled appears.
To enable the menus:
1 Repeat steps 1 through 4.
2 Press Menu until you see Enable.
3 Continue with steps 5 and 6.