Lexmark T522 - Serial Protocol

167
Serial Buffer
Purpose:
To configure the size of the serial input buffer.
Values:
Note: Changing the Serial Buffer menu item automatically resets the printer.
See also:
Resource Save
Serial Protocol
Purpose:
To select the hardware and software handshaking values for the serial interface.
Values:
See also:
Technical Reference
Disabled Disables the serial port.
Auto* Printer automatically calculates the Serial Buffer size (recommended setting).
3K to maximum
size allowed
User specifies the Serial Buffer size. The maximum size depends on the
amount of memory in your printer, the size of the other link buffers, and
whether Resource Save is set to On or Off. To maximize the range for the
Serial Buffer size, disable or reduce the size of the parallel, infrared, LocalTalk,
and USB buffers.
DTR* Hardware handshaking.
DTR/DSR Hardware handshaking.
XON/XOFF Software handshaking.
XON/XOFF/DTR Combined hardware and software handshaking.
XONXOFF/DTRDSR Combined hardware and software handshaking.