Lexmark T522 - Check <Device> Connection; Clearing Job Accounting Stat

88
Check <device>
Connection
What this message means:
The specified device is either not fully connected to the printer or is experiencing a hardware
failure.
What you can do:
•
Reestablish communication by removing the specified device and reattaching it to the printer.
• Press Go to clear the message and continue printing.
• If a hardware failure occurs, turn the printer off and back on. If the error recurs, turn the printer
off, remove the specified device, and call for service.
Clearing Job
Accounting Stat
What this message means:
The printer is deleting all job statistics stored on the hard disk.
What you can do:
Wait for the message to clear.
Close Door or
Insert Cartridge
What this message means:
The upper front door is open or the toner cartridge is not installed.
What you can do:
•
Close the upper front door.
• Install the toner cartridge.