Lexmark T522 - Between the Envelope Feeder and the Printer

72
4
Slowly pull the jammed envelope straight out toward you.
5 Replace the stack of envelopes in the envelope feeder.
6 Adjust the envelope edge guide.
7 Lower the envelope weight to the stack.
Note: If envelope jams continue to occur, repeat these steps and feed a single envelope
between steps 4 and 5. This may correct the problem.
Between the envelope feeder and the printer
1 Lift the envelope weight.
2 Flip the envelope weight back toward the printer.
3 Remove the stack of envelopes from the envelope feeder.
4 Push the envelope support to the closed position.
5 Open the printer upper front door.