132
Print Buffer
Purpose:
To print any data stored in the print buffer.
Note: Print Buffer is only available when you enter the Job Menu while Waiting is
displayed. The Waiting state occurs if an incomplete job is sent to the printer or an
ASCII job, such as a print screen command, is printing.
Reset Printer
Purpose:
To reset the printer to the user default value for each menu item, delete all downloaded resources
(fonts, macros, and symbol sets) stored in printer memory (RAM), and delete all data in the interface
link buffer.
Note: Before selecting Reset Printer, exit the software application you are using.
To Next Page
Loading...
