50
18
Replacing the transfer roll
Order a new transfer roll when light print, toner fog, or background shading appears. See Ordering
supplies for information on ordering a transfer roll.
Complete the following steps to replace the transfer roll. Refer to the documentation that comes with
the transfer roll for detailed installation information.
1 Turn the printer off and unplug the printer power cord.
2 Open the front doors and remove the print cartridge.
3 Remove the old transfer roll.
4 Install the new transfer roll.
5 Reinstall the print cartridge and close the front doors.
6 Plug the printer power cord into a properly grounded electrical outlet.
7 Reset the maintenance counter.
To Next Page
Loading...
