49
17
Replacing the charge roll
Order a new charge roll kit when toner fog or background shading appears. See Ordering supplies
for information on ordering a charge roll.
Complete the following steps to replace the charge roll. Refer to the documentation that comes with
the charge roll for detailed installation information.
1 Turn the printer off and unplug the printer power cord.
2 Open the front doors and remove the print cartridge.
3 Remove the old charge roll.
4 Install the new charge roll.
5 Reinstall the print cartridge and close the front doors.
6 Plug the printer power cord into a properly grounded electrical outlet.
7 Reset the maintenance counter.
To Next Page
Loading...
