42
5
Load the stack of envelopes flap side down with the stamp area and the flap on the left. The
end of the envelopes with the stamp area enters the envelope feeder first. Let the envelopes
at the bottom of the stack slide into the envelope feeder slightly more than the ones at the top
of the stack.
WARNING: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-
stick adhesives. These envelopes may severely damage the printer. See
Choosing envelopes for more information.
Note: Do not load more envelopes by forcing them under the envelope feeder weight.
This causes jams.
6 Slide the envelope edge guide to the left until it lightly touches the stack. Make sure the
envelopes do not buckle.
To Next Page
Loading...
