7
Set up the printer and print media handling options
2 Remove all packing material and
tape from each item.
3 Peel the appropriately numbered
decals from the sheet and attach
them to the recessed areas on the
drawer. Choose the number that
corresponds to the total number of
trays you are using, including the
standard tray.
Save the carton and packing
material in case you need to
repack the 2000-sheet drawer for
service or storage.
Note: The 16 AWG power cord is included only with units
intended to operate at 100–127V power.
1
2
3
4
5
1
2
3
4
5
16 AWG power cord
Decals
2000-sheet drawer
Jumper cord
To Next Page
Loading...
