55
Verify printer setup
Save the network setup page after it prints. You will use it in the other
steps.
Note: If an optional
MarkNet print server is
installed, you may see Print
Net1 Setup (or Print Net2
Setup).
1 Make sure the printer is on.
2 Press Menu until you see Utilities Menu, and then press Select.
3 Press Menu until you see Print Net Setup, and then press
Select
to print the page.
4 Check the first section on the network setup page and confirm
that Status is “Connected.”
If Status is “Not Connected,” your LAN drop may not be active
or your network cable may be malfunctioning. Consult your
network administrator for a solution. Afterward, print another
network setup page to verify connection to your network.
Printing Quick
Reference
information
Information about using the printer and clearing jams is included on
the Publications CD that shipped with your printer documentation.
We recommend you print this information and store it in a convenient
location near the printer.
To print Quick Reference information stored on the CD:
1 Launch the CD.
2 Click Quick Reference.
3 Print the documents.
The same Quick Reference pages are stored in the printer. To print
them:
1 Make sure the printer is on.
2 Press Menu until you see Help Menu, and then press Select.
3 When you see Quick Reference, press Select.
To Next Page
Loading...
