Lexmark T630 - Installing an Output Expander

24
Set up the printer and print media handling options
4 Place the tips of the wire bail into
the ends of the plastic bracket so
that the wire bail curves
downward.
The wire bail rests in the printer
output bin.
5 If you are not attaching any more
print media handling options,
attach the top cover to the
high-capacity output stacker.
Installing an output expander Each output expander consists of a
support and a removable bin. A wire bail,
bracket, and labels are also included.
Warning: The output expander bin is designed to hold
the weight of print media only. Excess weight may cause
it to disengage from the support.
After you carefully unpack the output
expander, install it immediately;
otherwise, the edges of the mounting
brackets could damage tabletops or
fabrics.
Note: If you have purchased a finisher or a high-capacity
output stacker, that print media handling option must be
installed directly on the printer, before the output
expander.
Bin
Labels
Bracket and wire bail
Support