14
Set up the printer and print media handling options
Setting up the printer Place the printer on any input options you
may have.
1 Ask someone to help you lift the
printer by the handholds and lower
it onto the duplex unit, optional
drawer, table or printer cabinet.
The tab, round peg, and square
holes on top of any drawer or the
duplex unit help you position the
printer so the edges are aligned
properly. Make sure the printer is
securely in place.
2 Remove the print cartridge
packaging.
a Push the release latch and
open the printer upper front
door.
b Grasp the print cartridge by the
handle and pull it up and out.
Square hole
Round peg
Ta b
Handhold
Handle
To Next Page
Loading...
