15
Set up the printer and print media handling options
c Pull on the tabs on each side of
the red plastic to remove the
packaging from the print
cartridge.
Retain the packaging.
Warning: Do not touch the photoconductor drum on the
underside of the print cartridge.
d Align the slides on the cartridge
with the slots on the cartridge
cradle. Use the colored arrows
inside the printer for
placement.
e Guide the cartridge down as it
drops and snaps into place.
f Close the upper front door.
3 Attach decals to the trays.
Decals showing the number “1”
are on your printer and the
standard tray. These decals keep
the standard tray paired with the
printer.
Use the decals shipped with any
optional drawer to mark it
appropriately. Peel the decals from
the sheet and attach them to the
recessed areas on the optional
drawers and the matching trays.
Tab
Ta b
3
2
3
2
1
1
To Next Page
Loading...
