28
Set up the printer and print media handling options
2 Slide the plastic bracket onto the
static brush holder, located on the
bottom of the 5-bin mailbox.
Note: If the mailbox will be the topmost print media
handling option, remove the wire bail from the bracket on
the top cover and store it in a safe place.
3 Insert the mounting brackets into
the slots on top of the printer,
finisher, output expander, or
previously installed 5-bin mailbox.
Make sure the mailbox is
positioned securely.
4 If you are not attaching any more
print media handling options,
attach the top cover to the mailbox.
Plastic bracket
Mounting slot
Mounting bracket
To Next Page
Loading...
