35
Install memory and option cards
• Parallel 1284-B Interface Card
• Coax/Twinax Adapter for SCS
Refer to the documentation included with
each card for detailed information about
that specific card.
Use a small Phillips screwdriver to install
these options.
Warning: Electronic components are easily damaged by
static electricity. Touch something metal on the printer
before you touch the card.
1 Locate the card connectors on the
system board. If you are installing
a tall card, install it in connector 1.
If you are installing two short cards
on a model with multiple
connectors, use connector 1 first
and then connector 2.
2 Remove the two screws and the
cover plate and save them.
If you are installing a tall card,
remove and save the adapter plate
screw and the adapter plate.
3 Unpack the card. Save the
packaging materials.
Connector 1
Connector 2
Cover plate
Adapter plate
To Next Page
Loading...
