5 Press the arrow buttons until Prt Quality Pgs appears, and then press .
The print quality test pages print.
6 Press the arrow buttons until Exit Config Menu appears, and then press .
Resetting the Printer appears briefly, and then Ready appears.
Blank pages
These are possible solutions. Try one or more of the following:
PACKING MATERIAL MAY BE ON THE TONER CARTRIDGE OR PHOTOCONDUCTOR KIT
1 Remove the toner cartridge and photoconductor kit.
2 Remove any remaining packing material.
3 Reinstall the toner cartridge and photoconductor kit.
THE TONER MAY BE LOW
When 88 Cartridge low appears, order a new toner cartridge.
If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.
Characters have jagged or uneven edges
If you are using downloaded fonts, verify that the fonts are supported by the printer, the host computer, and the
software program.
Troubleshooting
154
To Next Page
Loading...
