PJL
3-76
PORT parameter
The following ports are valid parameters for LESCAPECHAR:
LFAX PHONENUMBER Command
This command tells the printer that the output resulting from the current job is being
sent to the fax processing device instead of to the printer. The current job is printed
and is not sent to the fax processing device if one of the following occurs:
• The printer is not configured for fax send capability.
• The command is received with a command that selects an interpreter that
does not support formatting functionality for sending faxes.
•INA
•INA1
•INA2
•INA3
•LOCALTALK1
•LOCALTALK2
•LOCALTALK3
• PARALLEL
• PARALLEL1
• PARALLEL2
• PARALLEL3
•USB
• USB1
• USB2
• USB3
• SERIAL
• SERIAL1
• SERIAL2
• SERIAL3
•IR
•IR1
•IR2
•IR3
To Next Page
Loading...
