PJL
3-77
Syntax:
@PJL LFAX PHONENUMBER=“number” [STATIONID=“station name”][<CR>]<LF>
PHONENUMBER=“number”
The PHONENUMBER parameter is a text string up to 60 characters long. If an
unsupported character is supplied in the PHONENUMBER parameter, the entire
LFAX PHONENUMBER command is ignored.
[STATIONID=“station name”]
The STATIONID parameter specifies a station name that is sent to the receiving fax
machine to indicate the origin of an incoming fax. The “
station name” is a text string
which is truncated to 20 characters. A null value (“ “) indicates no station ID is
specified. If no station name is specified, the default station name of the printer is
used.
Table 3-21: LFAX PHONENUMBER “number” Values
Character Description
0 - 9 DTMF
1
digits 0 to 9
*DTMF
1
character *
#DTMF
1
character #
A - D DTMF
1
characters A, B, C, and D
!Flash
W Wait for dial tone
@ Wait for silence
& Wait for credit card tone
, (comma) Pause
^ Toggles between tone and pulse modes
1
DTMF, Dual Tone Multi-Frequency, is the system used by touch-tone telephones which assigns a
specific frequency, or tone, to each key so it can easily be identified by a microprocessor.
To Next Page
Loading...
