102
2-1. Instrument cluster
Route guidance
Compass display
Select to enable selection of an audio
source etc. on the meter using the
meter control switches.
Select to display the following system
information when the system is used.
Dynamic radar cruise control with
full-speed range (if equipped)
(P.230)
Dynamic radar cruise control (if
equipped) (P.240)
LKA (Lane-Keeping Assist) (if
equipped) (P.213)
LDA (Lane Departure Alert with
steering control) (if equipped)
(P.222)
Select to display warning messages
and measures to be taken if a malfunc-
tion is detected. (P.393)
Select to change the meter display set-
tings.
■ Language
Select to change the language on the
display.
■ Units
Select to change the unit of measure
for fuel consumption.
■ Eco Driving Indicator Light
(LC500)
Select to activate/deactivate the Eco
Driving Indicator Light.
■ EV indicator (LC500h)
Select to activate/deactivate the EV
indicator.
■ Drive information 1/Drive infor-
mation 2
Select up to 2 items that will be dis-
played on the “Drive Info 1” screen and
“Drive Info 2” screen respectively.
(P.99)
■ Pop-up display
Select to set the following pop-up dis-
plays, which may appear in some situa-
tions, on/off.
• Route guidance display of the navi-
gation system-linked system (if
equipped)
• Making call display of the hands-
free phone system
• Audio system operation display
• Instrument panel brightness adjust-
ment display
■ Ring position memory
Select to change the meter ring posi-
tion when the engine <hybrid system> is
started.
The position before the engine <hybrid
system> is stopped or the center posi-
tion can be selected.
Audio system-linked display
Driving assist system information
Warning message display
Settings display
To Next Page
Loading...
