427
8
8-1. Specifications
Vehicle specifications
LC500
■ Oil capacity (Drain and refill [Ref-
erence
*
])
*
: The engine oil capacity is a reference
quantity to be used when changing the
engine oil. Warm up and turn off the
engine, wait more than 5 minutes, and
check the oil level on the dipstick.
■ Engine oil selection
“Toyota Genuine Motor Oil” is used in
your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor Oil”
or equivalent to satisfy the following
grade and viscosity.
Oil grade:
5W-30 and 10W-30:
API grade SL “Energy-Conserving”,
SM “Energy-Conserving”, SN
“Resource-Conserving” or SN PLUS
“Resource-Conserving”; or ILSAC
multigrade engine oil
15W-40:
API grade SL, SM, SN or SN PLUS
multigrade engine oil
Recommended viscosity (SAE):
Temperature range anticipated
before next oil change.
Preferred
SAE 5W-30 is the best choice for
good fuel economy and good starting
in cold weather.
If you use SAE 10W-30 or a higher vis-
cosity engine oil in extremely low tem-
peratures, the engine may become
difficult to start, so SAE 5W-30 engine
oil is recommended.
Oil viscosity (5W-30 is explained here
as an example):
• The 5W in 5W-30 indicates the
Hybrid battery (traction battery) (LC500h)
Type Lithium-ion battery
Voltage 3.7 V/cell
Capacity 3.6 Ah
Quantity 84 cells
Nominal voltage 310.8 V
Lubrication system
With filter 8.6 L (9.1 qt., 7.6 Imp.qt.)
Without filter 7.9 L (8.4 qt., 7.0 Imp.qt.)
A
B