248
4-5. Using the driving support systems
■ Conditions under which the vehicle-to-
vehicle distance control mode may not
function correctly
In the case of the following conditions,
operate the brake pedal (or accelerator
pedal, depending on the situation) as nec-
essary.
As the sensor may not be able to correctly
detect vehicles ahead, the system may not
operate properly.
● When the road curves or when the lanes
are narrow
● When steering wheel operation or your
position in the lane is unstable
● When the vehicle ahead of you deceler-
ates suddenly
● When driving on a road surrounded by a
structure, such as in a tunnel or on a
bridge
● While the vehicle speed is decreasing to
the set speed after the vehicle acceler-
ates by depressing the accelerator pedal
*
:If equipped
■ Meter display
Set speed
Indicators
■ Operation switches
“+RES” switch
Cruise control main switch
“-SET” switch
Cruise control
*
Use the cruise control to maintain a
set speed without depressing the
accelerator pedal.
Use the cruise control on freeways
and highways.
System components
A
B
C
To Next Page
Loading...
