65
1
1-2. Child safety
For safety and security
child restraint system, and the head
restraint can be removed, remove the
head restraint.
Otherwise, put the head restraint in the
upper most position.
*4
: Use only a front-facing child restraint
system when the airbag manual on-off
switch is on.
■ Detail information for CRS installation
ISOFIX child restraint systems are divided into different “fixture”. The child
restraint system can be used in the seating positions for “fixture” mentioned in the
table above. For kind of “fixture” relation, confirm the following table.
If your child restraint system has no kind of “fixture” (or if you cannot find informa-
tion in the table below), please refer to the child restraint system “vehicle list” for
compatibility information or ask the retailer of your child seat.
Seating position
Seat position number
Airbag manual on-off switch
ON OFF
Seating position suitable for
universal belted (Yes/No)
Yes
Forward-fac-
ing only
Yes No No
i-Size seating position
(Yes/No)
No No No No
Seating position suitable for
lateral fixture (L1/L2/No)
No No No No
Suitable rearward facing fix-
ture (R1/R2X/R2/R3/No)
No No No No
Suitable forward facing fixture
(F2X/F2/F3/No)
No No F2X F2X
Suitable junior seat fixture
(B2/B3/No)
No No No No
Fixture Description
F3 Full-height, forward-facing child restraint systems
F2 Reduced-height forward-facing child restraint systems
F2X Reduced-height forward-facing child restraint systems
To Next Page
