174
RCFOM(GE)1903
4-3. Operating the lights and wipers
The Automatic High Beam indicator will
turn off.
Push the lever away from you to activate
the Automatic High Beam system again.
■
Switching to the high beams
Press the Automatic High Beam
switch.
The Automatic High Beam indicator will
turn off and the high beam indicator will
turn on.
Press the switch to activate the Automatic
High Beam system again.
*
:If equipped
Turns the rear fog light on
Releasing the switch ring returns it to .
Operating the switch ring again turns the
rear fog light off.
■
Operating conditions
The headlights are turned on.
■
Rear fog lights
●
When the rear fog lights are on, the rear
fog light indicator will illuminate in amber.
●
Use the rear fog lights when driving in
poor visibility conditions, such as rain or
fog, to make your vehicle more visible to
following vehicles. If the rear fog lights
are used when visibility is not poor, they
may impede the visibility of drivers in fol-
lowing vehicles. Use the rear fog lights
only when necessary.
Fog light switch
*
The fog light secure excellent visi-
bility in difficult driving conditions,
such as in rain and fog.
Operating instructions