Lexus RC F - Cruise Control

216
RCFOM(GE)1903
4-5. Using the driving support systems
*
: If equipped
Set speed
Indicators
Cruise control switch
1 Press the “ON/OFF” button to acti-
vate the cruise control.
Cruise control indicator will come on.
Press the button again to deactivate the
cruise control.
2 Accelerate or decelerate, with
accelerator pedal operation, to the
desired vehicle speed (above
approximately 40 km/h [25 mph])
and push the lever down to set the
speed.
Cruise control “SET” indicator and set
speed will be displayed on the multi-infor-
mation display.
The vehicle speed at the moment the lever
is released becomes the set speed.
To change the set speed, operate the
lever until the desired set speed is
obtained.
1 Increases the speed
2 Decreases the speed
Fine adjustment: Momentarily move the
lever in the desired direction.
Large adjustment: Hold the lever in the
desired direction.
Cruise control
*
Use the cruise control to maintain a
set speed without depressing the
accelerator pedal.
System components
Setting the vehicle speed
A
B
C
Adjusting the set speed
RC F_OM_General_OM24838E