258
RCFOM(GE)1903
5-2. Using the air conditioning system
Set automatic mode on/off
(P.258)
Turn the fan off
Set cooling and dehumidification
function on/off
If the “A/C” indicator is turned off, the sys-
tem will blow ambient temperature air or
heated air.
Adjust the temperature for driver
and passenger seats separately
(“DUAL” mode) (P.258)
Select to set eco mode on/off (if
equipped) (P.261)
Changing the fan speed setting
during the automatic mode opera-
tion (if equipped) (P.260)
■
Side display (vehicles with a
10.3-inch display)
Adjust the left-hand side tempera-
ture setting
Adjust the fan speed setting
Adjust the right-hand side temper-
ature setting
Set cooling and dehumidification
function on/off
If the “A/C” indicator is turned off, the sys-
tem will blow ambient temperature air or
heated air.
Adjust the temperature for the
driver’s and front passenger’s seats
separately (“DUAL” mode)
(P.258)
Select the air flow mode
1 Press , or select “AUTO”
on the air conditioning control
screen.
2 Press to switch to
automatic air intake mode. (if
equipped)
The air conditioning system automatically
switches between outside air and recircu-
lated air modes.
3 Adjust the temperature setting.
4 To stop the operation, press
or select “Off” on the sub
function menu.
■
Automatic mode indicator
If the fan speed setting or air flow
modes are operated, the automatic
mode indicator goes off. However,
automatic mode for functions other
than that operated is maintained.
■
Adjusting the temperature for
driver and passenger seats sepa-
rately (“DUAL” mode)
To turn on the “DUAL” mode, perform
any of the following procedures:
Press .
Select “DUAL” on the option con-
trol screen.
Using automatic mode