52
RCFOM(GE)1903
1-2. Child safety
covers.
2 If the child restraint has a top tether
strap, follow the child restraint man-
ufacturer’s operation manual
regarding the installation, using the
top tether strap to latch onto the
top tether strap anchor. (P.52)
3 After installing the child restraint
system, rock it back and forth to
ensure that it is installed securely.
(P.51)
■
Anchor brackets (for top strap)
Anchor brackets are provided for the
each rear seat.
Use anchor brackets when fixing the
top strap.
Anchor brackets
Top strap
■
Fixing the top strap to the anchor
bracket
Install the child restraint system in
accordance to the operation manual
enclosed with the child restraint sys-
tem.
Open the anchor bracket cover, latch
the hook onto the anchor bracket and
tighten the top strap.
Make sure the top strap is securely latched.
■
When installing a child restraint sys-
tem
Observe the following precautions.
Failure to do so may result in death or
serious injury.
●
After securing a child restraint system,
never adjust the seat.
●
When using the lower anchors, be
sure that there are no foreign objects
around the anchors and that the seat
belt is not caught behind the child
restraint system.
●
Follow all installation instructions pro-
vided by the child restraint system
manufacturer.
Using an anchor bracket (for top
strap)