OCCUPANT RESTRAINT SYSTEMS
206
4. To remove the infant seat, press the buckle−release button
and allow the belt to retract completely. The belt will move
freely again and be ready to work for an adult or older child
passenger.
(B) Convertible seat installation
A convertible seat must be used in forward−facing or
rear−facing position depending on the age and size of the
child. When installing, follow the manufacturer’s
instructions about the appropriate age and size of the
child as well as directions for installing the child restraint
system.
Install the child restraint system on the front passenger seat
only when it is unavoidable. Your vehicle is equipped with a
front passenger occupant classification system. In order to
activate the occupant classification system correctly, install the
forward−facing child restraint system on the front passenger
seat in the following order:
1. Turn the ignition key to the “ON” position.
2. Move the front passenger seat to the rearward position.
3. Put the child restraint system on the front passenger seat
without putting your weight on the front passenger seat.
4. Insert the seat belt tab into the seat belt buckle.
To Next Page
