Finish
AUDIO
351
(n) Changing the DVD language
Push the “DVD Language” switch on the “Setup Menu 1”
screen
1
and “Select DVD Language” screen
2
appear.
Select the language you want to read on the screen.
If you cannot find a language you want to read, push the
“Others” switch. The “Enter DVD Language Code” screen will
appear.
To return to the “Setup Menu 1” screen, push the “Back” switch.
If you cannot find a language you want to read, push the
“Others” switch. The “Enter DVD Language Code” screen will
appear.
To enter the code of the language you want to read, push the
number of the language code. For details about the language
codes, see the language code list. If you enter a wrong
number, push the “Clear” switch to delete the number.
Push the “Enter” switch on the screen. If numbers which are
not on the list are entered and the “Enter” switch is pushed, the
“Incorrect code” screen will appear. Push the language code
you want to read again.
To return to the “Select DVD Language” screen, push the
“Back” switch on the screen.
To Next Page
Loading...
