Lexus RX330 2005 - Changing the Initial Setting

Finish
AUDIO
348
(k) Changing the initial setting

1
For DVD video
2
For DVD audio
3
Remote control button
Push the “Set Up” switch on the screen or the “SET UP”
button on the remote control, and the initial setting screen
will appear. You can change the initial setting.
After the setting is done, the player plays from the beginning
of the chapter or the track.
There are initial setting switches on the “Setup Menu 1”
screen
1
and “Setup Menu 2” screen
2
.
To change the screen, push the “Page 1” or “Page 2” switch on
the screen.
After you change the initial setting, push the “Enter” switch.
The initial setting switch will be turned off and return to the
picture previously.
When the “Default” switch on “Setup Menu 2” is pushed, all
menus are initialized.