STARTING AND DRIVING
420
4
Acceleration cruising function: If the vehicle ahead
changes lanes, your vehicle cruising speed will be
gradually increased up to the preset speed, and your
vehicle resumes fixed−speed cruising.
This system operates by detecting primarily the reflectors
of the vehicle ahead. The distance may not be accurately
or absolutely detected in the following cases:
The vehicle ahead has higher ground clearance, which
means that the placement of the reflectors is in a higher
position.
The rear section of the vehicle ahead is extremely dirty.
The vehicle ahead or other vehicles around you are
flinging up water or snow.
Excessive exhaust gas (black smoke) is coming from
the vehicle ahead or other vehicles around you,
obscuring your front view.
There is an obstruction (protective film, sticker, etc.) on
the reflectors on the vehicle ahead, or reflectors are not
installed on the vehicle ahead or are damaged.
Heavy luggage in the luggage compartment or rear
seats is causing the nose of your vehicle to tilt up.
CAUTION
To avoid accidents, always keep the laser radar sensor
glass clean and never allow it to be covered with icicle
or any substance, so it can detect the vehicle in front.
(See “(k) Laser radar sensor” on page 429.)
To Next Page
Loading...
