51
2-2. Connectivity settings
2
Basic function
1 Press the “MENU” button on the
Remote Touch.
2 Select “Audio”.
3 Select “Source” on the sub
menu.
4 Select “Bluetooth”.
5 Select “Connect” on the sub
menu.
6 Select desired device name from
the list.
■ Auto connection mode
To turn auto connection mode on, set
“Bluetooth Power” to on. (P.54)
Leave the Bluetooth
®
device in a loca-
tion where the connection can be
established.
When the engine switch <power
switch> is in ACCESSORY or
IGNITION ON mode <ON mode>,
the system searches for a nearby
registered device.
The system will connect with the
registered device that was last con-
nected, if it is nearby. When auto-
matic connection priority is set to on
and there is more than one regis-
tered Bluetooth
®
phone available,
the system will automatically con-
nect to the Bluetooth
®
phone with
the highest priority. (P.54)
■ Connecting manually
When the auto connection has failed
or “Bluetooth Power” is turned off, it is
necessary to connect the Bluetooth
®
device manually.
1 Display the Bluetooth
®
setup
screen:
“MENU” button “Setup”
“Bluetooth”
2 Follow the steps in “Connecting a
Bluetooth
®
device” from step 2.
(P.49)
■ Reconnecting the Bluetooth
®
phone
If a Bluetooth
®
phone is disconnected
due to poor reception from the Blue-
tooth
®
network when the engine
switch <power switch> is in ACCES-
SORY or IGNITION ON mode <ON
mode>, the system automatically
reconnects the Bluetooth
®
phone.
Connecting a Bluetooth
®
device
in a different way (from Blue-
tooth
®
audio screen)
To Next Page
