Lexus RX450hL - Traffic Information

89
3-1. Basic operation
3
Navigation system
*
: This function is not available in some
countries or areas.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Info”.
3 Select “Traffic Incidents” on the
sub menu.
4 Select the desired item.
“Traffic Events on Current Road”: Select to
display traffic information for the current
road. (P.89)
“Traffic Events on Current Route”: Select to
display traffic information for the set route.
(P.89)
“Traffic Events Nearby”: Select to display
nearby traffic information. (P.89)
“Predictive Traffic Map”: Select to display a
map with predictive traffic data. (P.90)
“My Traffic Routes”: Select to display traffic
along the saved routes. (P.90)
● If a large amount of information is being
received, it may take longer than normal
for the information to be displayed on the
screen.
● If traffic information cannot be received
because the vehicle is outside of HD
Radio coverage area, it may still be able
to be received using DCM. (P.196)
A list of current traffic information can
be displayed along with information on
the location of each incident.
1 Display the traffic incidents screen:
 “MENU” button  “Info” 
“Traffic Incidents”
2 Select “Traffic Events on Current
Road”, “Traffic Events on Current
Route” or “Traffic Events Nearby”.
3 Select the desired traffic informa-
tion.
 When “Traffic Events Nearby” is
selected, depending on whether the
traffic flow information is
enabled/disabled, the following will
be displayed:
When enabled: Traffic event and conges-
tion information
When disabled: Traffic event information
only
4 Check that the traffic information is
displayed.
“Detail”: Select to display detailed traffic
information.
Traffic information
*
Traffic data can be received via HD
Radio™ broadcast or via DCM
(Data Communication Module) to
display traffic information on the
map screen.
Displaying the traffic screen
Displaying traffic information