29
2-1. Basic information before operation
2
Basic function
1 Use the touchpad of the Remote
Touch to select the desired button
on the screen.
2 The buttons on the screen can be
selected by either depressing or
double tapping on the touchpad.
Once a button has been selected,
the screen will change.
When the pointer moves close to a
button, it will automatically snap to
that button and the Remote Touch
feedback force (vibration) is gener-
ated by the touchpad.
This feedback force can be
adjusted. (P.68)
● Perform touchpad operations using a fin-
ger. Do not use nails or other objects like
pens, etc.
● Perform pointer movement operations
using only one finger. The pointer cannot
be operated by using more than one fin-
ger.
● When water or other foreign materials
are on the touchpad, a malfunction may
occur. In those cases, wipe off the water
or foreign materials and wait about 30
seconds before operating the touchpad.
● In the following cases, there is a possibility
that the touchpad may not react nor-
mally:
• When wearing gloves, etc.
• When operated with a wet hand.
• When a film, paint-like substance, etc., is
on the touchpad.
• When water or other foreign matter is on
the touchpad.
• Near a TV tower, electrical power plant,
gas station, large display, airport or other
facility that generates strong radio waves
or electrical noise.
• When wireless devices, such as portable
radios and mobile phones are nearby.
• When the following metal items are
placed on the touchpad:
Coins
Keys
Metal parts of a wallet or purse
A card in which aluminum foil, etc., is
attached
A box of cigarettes that uses aluminum
foil
Disposable hand warmers
Media such as CD/DVDs, USB cables,
etc.
• When the temperature is -4 °F (-20°C)
or less
● If a hand or object was placed on the
touchpad when the engine switch <power
switch> is in ACCESSORY or IGNI-
TION ON mode <ON mode>, the touch-
pad may not react normally. In those
How to use the touch-
pad/touch screen
This system can be operated by the
touchpad/touch screen when the
engine switch <power switch> is in
ACCESSORY or IGNITION ON
mode <ON mode>.
Touchpad operation