66
2-3. Apple CarPlay/Android Auto
Although an Apple CarPlay/
Android Auto connection is
established, audio is not output
through the system.
The system may be muted or the volume may be low.
Increase the system volume.
The Apple CarPlay/Android
Auto screen has artifacts
and/or audio from Apple Car-
Play/Android Auto has noise.
Check if the USB cable being used to connect the device
to the system is damaged.
To check if the USB cable is damaged internally, connect
the device to another system, such as a PC, and check if
the device is recognized by the connected system. (The
device should begin charging when connected.)
After checking all of the above, try to establish an Apple
CarPlay/Android Auto connection. (P.61, 62)
The map display of the Apple
CarPlay Maps app (Apple
Maps) cannot be enlarged or
contracted with pinch
multi-touch gestures.
As the Apple CarPlay Maps app (Apple Maps) is not
compatible with pinch multi-touch gestures, this is not a
malfunction.
The Apple CarPlay screen is
only displayed in the center of
the 12.3-inch display and does
not take up the entire screen.
The 12.3-inch display is supported by iOS Ver. 10 and
later. Update to the latest iOS version.
The touchpad does not vibrate
on the Apple CarPlay screen.
Vibration feedback is supported by iOS Ver. 11 and later.
Update to the latest iOS version.
During Apple CarPlay music
application (Apple Music, Spo-
tify, etc.) playback, if the iPhone
is operated to start and play
audio from an application that is
not compatible with Apple Car-
Play
*
and the onboard device
volume is changed, the audio of
the incompatible application
stops and the system resumes
playback of the original music
application.
This operation is performed according to the specifica-
tion of the onboard device, this is not a malfunction.
Symptom Solution
To Next Page
Loading...
