Transport and storing
22 300324726_002_C0 - 10/2016 - © Leybold
2 Transport and storing
Remove the equipment from the transportation box and keep the packaging.
Make sure that the product has not been damaged during transportation. If
this unit is damaged contact your carrier and inform Leybold if necessary.
To prevent damages to the pump, use the packaging pro vided for storage
and transport.
Be careful not to damage the sockets and connections during transporta-
tion.
Do not stand below the pump while connecting or removing the turbo-
molecular pump.
The turbomolecular pump is shipped in a sealed PE bag with desiccant. Do
not open the sealed package until immediately before installing.
Do not remove the covers and blanking flanges until you are ready to make
the connections, to ensure that the turbomolecular pump is installed under
the cleanest possible conditions.
Turbomolecular pumps which were not operated for a period of over 12
months should be returned to us. For more information on this please con-
tact your local sales partner.
Do not store pump and accessories in a moist atmosphere so as to prevent
these items from suffering corrosion.
The MAG is supplied with three crane eyes which have been screwed into
the casing. They can also be screwed into the bottom of the pump. For this
unscrew the feet first.
Keep the packaging
NOTICE
WARNING
Fig. 2.1 Crane eyes
To Next Page
Loading...
Need help?
General
