58
Lower Drift Pin Assembly (#AEC0011)
The Lower Drift Pin Assembly is located below
the base of the tablet. It holds the Lower Punch
in place in the Die while the Upper Punch pushes
down to form the tablet in the middle. Order at
https://www.lfatabletpresses.com/tdp6s-lower-
pin-assembly
Cam Drive Cog (#AFC0050)
The Cam Drive Cog is attached to the Top
Cam Drive Shaft and drives the Lower Drift Pin
Assembly Timing Rod. Order at https://www.
lfatabletpresses.com/tdp6s-fly-wheel
Pinion Gear (#AFC0022)
The Pinion Gear amps up the Motor's torque
to get the maximum amount of force available.
Order at https://www.lfatabletpresses.com/
tdp6s-fly-wheel-cap
Boot Timing Drive Bar Runner (#AEC0020)
The Boot Timing Cam Runner is a round section
that connects the Boot Timing Cam to the Boot
Timing Bar, which keeps the timing. Order at
https://www.lfatabletpresses.com/tdp6s-boot-
drive-runner
To Next Page
Loading...