29
ENG
ENGLISH
During USB operations such as Dvix or EMF, all commands except Power (k a) and Key (m c) are not executed
and treated as NG.
Some commands are not supported depending on the model.
The f f command which shows the status of a certain command does not display the OSD as the result in
order to be compatible with SuperSign program.
NOTE
COMMAND
DATA
(Hexadecimal)
1 2
42 Power On Delay f h 00 to 64
43
Tile Mode
d d
00 to 01
44 Tile Mode Check d z FF
45 Tile ID d i Refer to ‘Tile ID'.
46
Tile H Position
d e
00 to 32
47 Tile V Position d f 00 to 32
48 Tile H Size d g 00 to 32
49 Tile V Size d h 00 to 32
50 Natural Mode (In Tile mode) d j 00 to 01
To Next Page
