17
ENG
ENGLISH
USING THE MONITOR
USING THE MONITOR
Connecting to a PC
Your Monitor supports the Plug & Play* feature.
* Plug & Play: This is the function that allows a PC
to use the monitor without installing a driver.
NOTE
Do not press the screen with your finger for
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the screen
for a long period of time to prevent image
burn. Use a screensaver if possible.
Connect the
signal input cable
and tighten it by
turning the screws
clockwise.
It is recommended you use an HDMI
connection for the best image quality.
Use a shielded signal interface cable, such
as D-sub 15 pin signal cable and DVI cable,
with a ferrite core to maintain standard
compliance for the product.
If you turn the Monitor on when the set is
cold, the screen may flicker. This is normal.
Some red, green, or blue spots may appear
on the screen. This is normal.
For some graphic cards, the screen may not
display properly when you use dual monitors.
CAUTION
To Next Page
