8
ENG
ENGLISH
If the USB HDD does not have an external power
source, the USB device may not be detected. So
be sure to connect the external power source.
- Please use a power adaptor for an external
power source. We do not guarantee an USB
cable for an external power source.
If your USB memory device has multiple parti-
tions, or if you use a USB multi-card reader,
you can use up to 4 partitions or USB memory
devices.
If a USB memory device is connected to a USB
multi-card reader, its volume data may not be
detected.
If the USB memory device does not work prop-
erly, disconnect and reconnect it.
How fast a USB memory device is detected dif-
fers from device to device.
If the USB is connected in Standby Mode,
specific hard disk will automatically be loaded
when the display is turned on.
The recommended capacity is 1 TB or less for a
USB external hard disk and 32 GB or less for USB
memory.
Any device with more than the recommended
capacity may not work properly.
If a USB external hard disk with a Energy Saving
function does not work, turn the hard disk off
and on again to make it work properly.
USB storage devices below USB 2.0 are sup-
ported as well. But they may not work properly
in the movie list.
Maximum of 999 folders or files can be recog-
nized under one folder.
A USB 3.0 storage device may not work.
Data on some USB storage devices may be
damaged in a high temperature environment.
To Next Page
