LG BL40 - Using the Flash; Choosing a Shot Type

58 LG BL40 | User Guide
Using the flash
The default flash setting is auto, but
there are other options.
Select from the left side of
the viewfinder to enter the flash
sub-menu.
There are three flash options:
Auto - Your camera will assess the
light available for a good picture
and use the flash as necessary.
Red -eye reduction - The camera
will flash twice in order to remove
red eye.
Always off - The camera will
never flash. This is useful if you
want to save battery power.
Always on - The camera will
always flash.
When you touch the option
you want, the flash menu will
automatically close, allowing you
to take a picture immediately.
1
2
3
The flash status icon in the
viewfinder will change based on
the new flash mode.
Choosing a shot type
Touch and select Shot mode
to open the available shot types
Choose from eight options:
Normal shot -This is the default
shot type, the photo will be taken
in the normal way, as outlined in
taking a quick photo.
Continuous shot - This enables
you to take six shots automatically
in very quick succession.
Stitch shot - This enables you to
stitch photos side by side after
continuous shot. Six to eight
pictures can be merged together
in a panoramic image, allowing
you to enjoy the full size of your
BL40’s screen.
4
1
2
Camera