DJ PRO
It allows you to mix CLUB, DRUM or USER sound
effect. Each mode has up to 6 sounds effect.
1. Press and hold DJ PRO (CLUB, DRUM or USER)
on the unit to select a desired DJ PRO sound
effect.
2. Press DJ PRO pad (1, 2, 3, 4, 5, 6) of desired
sound on the unit.
y If you want to use USER, you have to register
a source with “Music Flow Bluetooth” app.
If the source is not register to USER, “USER
MODE EMPTY” or “DJ PRO NO SOUND”
appears on the display window.
y Initial DJ Pro mode is CLUB sound effect.
y DJ Pro mode is displayed for 3 seconds when
you press DJ PRO (CLUB, DRUM or USER)
on the unit.
y The DJ PRO sound is mixed when you press
DJ PRO pad (1, 2, 3, 4, 5, 6) on the unit.
y The currently playing DJ PRO sound is
stopped and the selected DJ PRO sound
outputs if you press a different DJ PRO pad
(1, 2, 3, 4, 5, 6) on the unit while DJ PRO
sound is playing.
,
Note
DJ LOOP
The certain section (about 1 sec) of sound is
repeatedly played. (CD, USB Only)
During playback, press and hold DJ LOOP on the unit
at the point you want. And you can cancel DJ LOOP
function by releasing it.
This function is released after operating 10
times or releasing DJ LOOP on the unit.
,
Note
PARTY ACCELERATOR
It allows you to create a party atmosphere.
1. Select the mode by pressing PARTY
ACCELERATOR MODE on the unit.
The sound effect will react differently according
to the mode.
PARTY ACCEL MODE 1
PARTY ACCEL MODE
2 PARTY ACCEL MODE 3
2. After selecting the mode, slide up the lever of
PARTY ACCELERATOR on the unit to create a
party atmosphere.
The sound effect will react according to moving
the lever of PARTY ACCELERATOR on the unit.
PARTY ACCEL OFF
PARTY ACCEL 1
PARTY ACCEL 2 PARTY ACCEL CLIMAX
To Next Page
Loading...
