Advanced Operations
Recording to USB
You can record a various sound source to USB 1.
(CD, USB 2, AUX 1, AUX 2, PORTABLE, RADIO (FM))
1. Connect the USB 1 device to the unit.
2. Press F to select a function you want to record.
3. Start the recording by pressing USB REC on the
remote control or USB REC / DEMO on the unit.
Function
/Mode
Status Result
CD, USB
Play/Pause Recorded until stop
Resume stop
(Page 37)
Quick recorded the latest
song
Full stop
Quick recorded All songs
In case below, scope is
limited.
- After File search (Page
21), quick recorded an
indexed song.
- Only while the Folder
name is displayed on the
display window, quick
recording All songs on
Folder. (Folder Search
Mode is released when
there is no button input
for a few seconds after
entering the folder search
mode.) (Page 21)
- After JUKE BOX On
(Page 36), quick
recorded All songs of
JUKE BOX.
AUX 1,
AUX 2,
PORTABLE,
RADIO
(FM),
MIXER ON
mode
- Recorded until stop
To stop recording
To stop recording, press and hold USB REC on the
remote control or USB REC / DEMO on the unit for
3 seconds. Otherwise, the recording continues.
Pausing recording
During CD/USB playback or pause, external sound
source recording, or MIXER ON mode, press USB
REC on the remote control or USB REC / DEMO on
the unit to pause recording.
Press it again to restart recording.
y VOICE CANCELLER or KEY CHANGER
will be reset, if you use recording function
during operating VOICE CANCELLER or KEY
CHANGER.
y VOICE CANCELLER or KEY CHANGER can
not be operated during recording.
,
Note