To select recording bit rate
1. Press and hold USB REC on the remote control
or USB REC / DEMO on the unit for 3 seconds.
2. Press
C
/
V
on the remote control or
C
/
V
on the side 1 of the unit to select a bit rate.
3. Press USB REC on the remote control or USB
REC / DEMO on the unit to finish the setting.
Recording in MIXER ON mode
Recording is available in MIXER ON mode.
If you record in MIXER ON mode, the unit records the
mixed sound from that point when you press USB
REC on the remote control or USB REC / DEMO on
the unit.
1. Start mixing. (Page 25)
2. Start the recording by pressing USB REC on the
remote control or USB REC / DEMO on the unit.
To stop recording, press and hold USB REC on the
remote control or USB REC / DEMO on the unit
to stop recording.
Otherwise, the recording continues.
The making of unauthorized copies of
copy-protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
y For stable recording, the output sound level
goes down on its own when you record music
from CD to USB.
y You can only change volume level between
MIN and 30 during recording. (Only CD
function)
y When you stop recording, the le that has
been recorded at that time will be stored.
(In MIXER OFF mode, except when USB/CD
that are in stop status.)
y Do not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete le may be made and not deleted
on PC.
y If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL”, “NOT
SUPPORT” or “FILE MAX” is displayed on the
display window.
y Multi card reader device or external HDD can
not be used for USB recording.
y A le is recorded by about 512 Mbyte when
you record for a long term.
,
Note
To Next Page
Loading...
